Xerox DocuPrint 180, Message Manual

Page: 97 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 6-19
OS1240 Status command inoperative
The <JOBS STATUS> key was pressed or the JOBS command was
entered. The system is unable to display status because a file was
not created at sysgen due to insufficient disk space.
Action 1. Delete files to create more space.
2. Compress disk.
3. Enter the SFS CREATE command to create a status file. (Refer
to your Xerox DocuPrint 180 LPS Operations Reference
chapter on system and report accounting, including status file
information, for details.)
OS1245 STAFIL.SYS Initialization failure status inoperative
The SFS CREATE command was entered. The system is unable to
process the command because the file was not created at sysgen
due to insufficient disk space.
Action 1. Delete some files to create more space.
2. Compress disk.
3. Enter the SFS CREATE command to create a status file. (Refer
to your Xerox DocuPrint 180 LPS Operations Reference
chapter on tracking system activity for additional information.)
OS1250 Accounting enabled
A disabled accounting function has been reinstated.
Action None.
OS1255 Accounting disabled
The accounting function is restricted. The system will not process the
ACCOUNT or REPORT command that has been entered.
Action Obtain the correct password and log on at the correct level. (Refer to
your
Xerox DocuPrint 180 LPS Operations Reference chapter on
setting LPS parameters for additional information.)
OS1261 Paper size out of range
The paper size specified in the JSL is not supported by the IOT.
Action Contact your systems specialist.
OS1262 Sysgen paper size out of range
If a paper size statement is not included in the JDL, the system will
use the values specified at SYSGEN. This message indicates that
the SYSGEN value is not supported by the IOT.
Action Perform a MINI SYSGEN and correct the default paper size.