Xerox DocuPrint 180, Message Manual

Page: 318 / 356

XEROX DOCUPRINT 180 LPS ADDITIONAL MESSAGES
15-52 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
Sheet delivery signal but no output phase record exists.
A sheet delivery signal has been received but no output phase exists
for the report. Auditor has not recorded start of output.
Action If the problem persists, call Xerox Customer Service.
Sheet delivery signal but not processing output phase.
A sheet delivery signal has been received but no output phase exists
for the report. Auditor has not recorded start of output.
Action If the problem persists, call Xerox Customer Service.
SOR-input received out of sequence - already in input phase.
A Start Of Report signal has been received from the ESS before an
End Of Report signal for the preceding job.
Action If the problem persists, call Xerox Customer Service.
SOR-output received out of sequence - already in output phase.
A Start Of Report signal has been received from the ESS before an
End Of Report signal for the preceding job.
Action If the problem persists, call Xerox Customer Service.
Specified file does not exist.
An audit log desired for formatting, saving, deletion, or inquiry does
not exist.
Action Change the name of the report entered in the request field, or select
from the list of audit logs.
System has insufficient disk space to format log xxxx. Convert
or Print request has been cancelled.
The PC user interface console log print file is full.
Action Clear files on the PC UI hard disk to make more space for the print
log. If you don’t want to clear space on the PC UI hard disk, you can
save the console log file to a floppy diskette and print it from the
diskette.
Target filename already exists.
An Audit Log with the same report name already exists on the target
device.
Action Rename the target file or delete the old Audit Log and retry the
operation.