Xerox DocuPrint 180, Message Manual

Page: 295 / 356

XEROX DOCUPRINT 180 LPS ADDITIONAL MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 15-29
BTEXT signal text invalid response
A BTEXT keyword parameter contains invalid data, for example an
incorrectly specified date.
Action Check JSL or DJDE in job stream to ensure that all BTEXT keywords
and parameters are correct.
BTEXT signal text truncated
A BTEXT signal has exceeded the maximum buffer size allowed,
resulting in truncation of the excess data. This may be caused by
keyword parameters that exceed the published maximum sizes.
Action Check JSL or DJDE in job stream to ensure that all BTEXT keywords
and parameters are correct.
Cannot access memory for record position pointer.
Attempting direct read of file but list of records does not exist.
Action If the problem persists, call Xerox Customer Service.
Cannot access memory for report format buffer.
Report format buffer does not exist.
Action If the problem persists, call Xerox Customer Service.
Cannot allocate memory for format list.
Insufficient memory exists to allocate memory for a formatting list
buffer.
Action If the problem persists, call Xerox Customer Service.
Cannot allocate memory for report audit heading record.
Insufficient memory exists to initiate the in-process audit log.
Action If the problem persists, call Xerox Customer Service.
Cannot allocate memory for report definition memory.
Insufficient system memory exists to contain the report definition
script file.
Action If the problem persists, call Xerox Customer Service.
Cannot allocate memory for report exception list.
Insufficient system memory exists to contain the list of exception
records.
Action Try formatting the report without the "Purge After" option. If the
problem persists, call Xerox Customer Service.