Xerox DocuPrint 180, Message Manual

Page: 107 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 6-29
OS1460 Cannot space if “Reports:” is specified with Start CMD
The SPACE n REPORTS command was entered. The system
cannot process the command because the REPORTS option of the
START command was entered when the job was started.
Action 1. Allow all data to print.
or
Enter ABORT job to cancel the job.
2. Restart the job without the REPORTS option in the START
command.
OS1500 Page spacing stopped by Beginning-of-Report
The SPACE -n PAGES command was entered, but the system will
not space backward any more because it sensed a magnetic tape
label indicating the beginning of a report.
Action None.
OS1509 Page spacing already in progress
The SPACE n PAGES command was entered, but the system had
not completed a previously entered spacing command.
Action None.
OS1510 Page spacing stopped by End-of-Report
The SPACE n PAGES command was entered. The system cannot
space forward any more because it sensed a tape label indicating the
end of the report.
Action None.
OS1520 Block spacing stopped by End-of-File
The MOVE n BLOCKS command was entered, but the system has
reached the End of File tape label and cannot move forward over any
more text.
Action None.
OS1530 Cannot backward space any more pages
The SPACE -n PAGES command was entered. The system cannot
space backward any more pages because it is printing the last or only
copy of a report. (Pages were cleared from system disk immediately
after printing.)
Action None.