Xerox DocuPrint 180, Message Manual

Page: 56 / 356

IFU (INTERPRESS FONT UTILITY) MESSAGES
5-18 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
IF2720 Syntax error in statement x
An error exists in the given statement.
Action Check and reenter the command, using the corrected statement.
IF2730 Semantic error in statement x
An error exists in the meaning of the statement as formatted.
Action Check and reenter the command, using the corrected statement.
IF2790 Parser error: next _ charcalled with invalid mode
An error has occurred while the system was reading the command
line. This could be the result of a previous syntax error in the
command line.
Action Check the command syntax and retry.
IF2791 Parser error: invalid next _ char (2) call
An error has occurred while the system was reading the command
line. This could be the result of a previous syntax error in the
command line.
Action Check the command syntax and retry.
IF2805 Invalid medium parameter
The statement that defines the source (TAPE, CASSETTE, DISK,
FLOPPY) of the FIS master is incorrect.
Action Check and reenter the command using an allowable type of medium.
IF2850 Invalid LPS seed parameter
The statement defining the LPS seed name (the base or root of the
name) of the newly created font file is incorrect.
Action 1. Verify the seed name in the LPS seed name parameter in the
font profile, and reenter the command.
2. If the message reappears, contact your systems specialist or
Xerox Customer Support.
IF2851 Invalid default font name
The default substitution font requested is incorrect.
Action Check and reenter the DEFAULT statement using an acceptable font
name.