Xerox DocuPrint 180, Message Manual

Page: 46 / 356

IFU (INTERPRESS FONT UTILITY) MESSAGES
5-8 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
IF2061 Attempting to append to a non IFU COPY medium. Mount
correct medium or initialize the medium and retry
Appending an IFU COPY WRITE file to the end of a non IFU COPY
medium is not permitted.
Action 1. Mount the correct tape
or
Initialize the medium via the IFU VOLINIT command if the data
on the tape is not needed. (Refer to your
Xerox DocuPrint 180
LPS Operations Reference
chapter on managing LPS
resources for additional information.)
2. Retry the command.
IF2062 This is an IFU COPY medium but it contains no IFU data. please
mount the correct medium to read
There is no data on the medium to read.
Action 1. Mount the correct medium with the needed data.
2. Enter C to continue reading
IF2080 Reading x.
The IFU COPY READ command was reading an Interpress font
family name when end of volume was reached. A message will follow
asking whether you wish to continue searching onto the next volume
or quit the operation.
Action 1. Mount the next volume.
2. Enter C to continue reading.
Note: If you elect to quit the operation, a warning message will
follow indicating that exiting execution at this time may corrupt the
font structure on the system.
IF2090 Interpress font was not found
The Interpress font name requested has not been found during an
IFU COPY READ command. A message will follow asking whether
you wish to continue searching onto the next volume or quit the
operation.
Action Mount next volume to continue searching
or
Discontinue the operation.