Xerox DocuPrint 180, Message Manual

Page: 229 / 356

SCALE COMMAND MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 11-5
**Font scaling resulted in size mismatch**
Scaling caused a mismatch between the estimated and actual
bitmap sizes.
Action Contact your systems specialist or Xerox Customer Support.
**Font xxxx is not alpha-numeric**
The font or logo is either Kanji or corrupted.
Action 1. Check the file via the SAMPLE command.
2. If corrupted, restore the font from a backup source.
**Form File, xxxx, cannot be scaled (TL/DL size)**
The SCALE command has been aborted because the resulting FR6
file is larger than the system allows.
Action None
**Form font file not found xxxx**
The font file used in the requested form was not found in the FN6 or
LG6 directory.
Action Copy the 600 spi font or logo onto the system and reenter.
or
Use SCALE to create the 600 spi version.
**Illegal switch xxxx**
The requested switch is not permitted in SCALE.
Action Correct and reenter the command.
FST Size: n.n. Header SPI: n.n
Bitmap SPI: same
Bitmap SPI: bit-doubled
Bitmap SPI: interpolated
This message gives the font specification file size and spi
information.
**Lines of different widths not supported**
The requested form consists of a format which cannot be scaled to
600 spi correctly.
Action None