Xerox DocuPrint 180, Message Manual

Page: 147 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 6-69
OS2885 Max number of fonts exceeded.
JDE called for more fonts per page than were specified at installation.
The job is being aborted. The default FONTS value is 32.
Action 1. Enter the JDE/DJDE command calling for a number of fonts
within the range established at installation.
2. Restart the job.
OS2900 Input block length exceeds JDE max, do the following: * ABORT
and RETRY, specifying another JDE/JDL
A block was input exceeding the maximum block length specified by
JDE. If the job is printed, text will be lost or misplaced.
Action 1. Enter the ABORT I command.
2. Resend the job, specifying a JDE/JDL calling for greater block
length.
OS2910 No accounting file entry for department.
No accounting file was set up at installation for the department name
entered. The system will report data in a “NODEPT” file.
Action Enter the ACCOUNT command to establish a file for the department.
(Refer to your
Xerox DocuPrint 180 LPS Operations Reference
chapter on tracking system activity for additional information.)
OS2915 Security violation.
The requested file was protected by ABNORMAL SECURITY = YES
command. An attempt was made to access a file at the wrong logon
level.
Action To access the file, obtain the correct password and log on at Level 5.
(Refer to your
Xerox DocuPrint 180 LPS Operations Reference
chapter on setting LPS parameters for additional information.)
OS2920 FEX error, FEXDMP.JDL not found. Recompile FEXDMP.JSL.
FEX cannot find the file you have requested (FEXDMP.JDL) on the
system disk.
Action Recompile the FEXDMP.JSL and reenter the FEX command.
OS2921 Check finishing parameter NVM memory
The printer‘s finishing information may have incorrect non-volatile
data.
Action Restore the values that were displayed at the printer control console.