Xerox DocuPrint 180, Message Manual

Page: 218 / 356

PR (HARDCOPY GRAPHICS PRINTING COMMAND) MESSAGES
9-2 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
PR2600 Not enough space on disk to hardcopy.
The selected file cannot be hardcopied because the print file is not
large enough to hold it
Action 1. Use the REALLOCATE command to enlarge the print file.
(Refer to your Xerox DocuPrint 180 LPS Operations Reference
chapter on setting LPS parameters for additional information.)
2. Reenter the HARDCOPY command.
PR2710 Scale factor invalid, check and retry.
The “n/d” scale parameter of the HARDCOPY command was entered
incorrectly.
Action Reenter the command correctly. (Refer to your Xerox DocuPrint 180
LPS Operations Reference chapter on running print jobs.)
PR2720 HPOS value out of range, check and retry.
The number entered for horizontal position (hpos) parameter of
HARDCOPY command was beyond the permitted range.
Action Reenter the command correctly. (Refer to your Xerox DocuPrint 180
LPS Operations Reference chapter on running print jobs for
additional information.)
PR2730 VPOS value out of range, check and retry.
The number entered for the vertical position (vpos) parameter of
HARDCOPY command was beyond the permitted range.
Action Reenter the command correctly. (Refer to your Xerox DocuPrint 180
LPS Operations Reference chapter on running print jobs for
additional information.)
PR2760 File not found, check and retry.
The file specified in the “file name” parameter of HARDCOPY
command does not exist on system disk.
Action 1. Verify the desired file name and reenter the command.
2. If the message reappears, load the desired .IMG file to disk.
(Refer to your Xerox DocuPrint 180 LPS Operations Reference
chapter on setting LPS parameters for additional information.
PR2780 No files found matching mask
No files were found containing file name characters entered in the
“mask” option of the HARDCOPY command.
Action 1. Recheck and correct “mask” characters. (Refer to your Xerox
DocuPrint 180 LPS Operations Reference chapter on setting
LPS parameters for additional information.)
2. Reenter the command.