Xerox DocuPrint 180, Message Manual

Page: 12 / 356

INTRODUCTION
xii XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
The conventions used in this guide
The following conventions are used throughout this guide:
•
When keyed in, most commands can be shortened to three
letters. For example, RESET may be entered as RES.
Commands are shown in capital letters.
•
Variable numbers, letters, and words appear as lowercase
italicized characters. These variables represent the actual
characters you will see in system controller display messages
or will enter in commands. For example, the command FEED
cluster-name and the message OS1010 STARTING JOB xxxx
contain variable elements.
•
There are four symbols used for variables in this guide:
n = Any permitted number. Decimal numbers appear as nn.nn
x = Any applicable letter. Variable words appear as strings of
x’s, such as xxxx
y = A second variable number or letter appearing when n or x
has already been used in the message
z = A third variable number or letter appearing when n and/or x
and y have already been used in the message
•
The names of keys are indicated in capital letters and enclosed
in delimiters, such as the <CON> and <ENTER> keys.
•
If a printer display message appears in conjunction with a
system display message, it is shown in the Meaning/action
column of the message guide in capital italicized letters, for
example: EMPTY SAMPLE TRAY.
•
The terms “feeder tray,” “paper tray,” and “tray” are used
interchangeably.
•
Other terms used include the following:
enter = Key in a command or response, then press the
<ENTER> or <RETURN> key.
restart job = Send or transmit a job again (online) or rewind a
tape and start job again (offline).
recode job = Rewrite the JSL entry or DJDE, making necessary
changes.