Xerox DocuPrint 180, Message Manual

Page: 94 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-16 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
OS1132 --- NVM Finishing locations ---
This message lists the values that are currently in the printer‘s non-
volatile memory.
Action Save (write down) these values so that you can restore them should
an FEX communications problem lose these values from the printer‘s
non-volatile memory.
OS1133 FEX: Warning, number of pages is greater than 23.
This message advises you that you have selected too many pages
for the FEX test print job.
Action 1. Select fewer pages for the test case job.
2. Retry running FEX.
Note: This may be an issue only with certain finishing devices
which require readjustments for page sets of more than 23
pages. Consult your finishing device documentation for
additional information.
OS1134 Checking for existence of x.x on system
FEX is looking for the requested .FRM directory in the system‘s
memory. If FEX finds the requested form name, it will show ‘FOUND’
on the display.
Action None.
OS1135 FEX: Error, Form: x.x does not exist. Exiting.
FEX cannot find the requested .FRM directory in the system.
Action Verify the form directory (file-name) and retry the command.
OS1136 Sheet rotation: ‘0’ = None or ‘1’ = Rotate sheet:
This is one of a series of FEX questions about the test print job, which
also includes messages OS2922, OS2923, OS2924, and OS2008.
Action Enter 0.
OS1137 Rotation will be set to x.
This message verifies that you have selected either rotation (‘1’) or
non-rotation (‘0’) of sheets for your FEX test print job.
Action None.
OS1150 Job queue full
Print queue cannot hold any more data.
Action Print or delete jobs in queue before more jobs are sent.