Xerox DocuPrint 180, Message Manual

Page: 23 / 356

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 4-1
4. 4 HIP (host interface processor)
messages
These messages may appear on your system controller display if
printer communications have been established through the host
interface processor (HIP). The HIP chapters in your
Xerox DocuPrint
180 LPS Operator Guide and Xerox DocuPrint 180 LPS Operations
Reference
provide detailed information on HIP.
Note: Only XPS and XPF are applicable when looking at these
messages.
HP0010 Host interface processor unloaded
The HIP command was entered. HIP task is activated and ready to
receive jobs.
Action None.
HP0020 Host interface processor unloaded
The HIP END command was entered. HIP task is deactivated.
Action Wait for the system to print any files stored in the HIP buffer.
HP0030 Logging enabled
You have entered the HIP LOG [START] command. The system has
enabled the logging of selected XNS operations.
Action None
HP0031 Logging disabled
You have entered the HIP LOG [STOP] command. The system is
telling you that it has disabled the logging of selected XNS
operations. You can disable selected XNS operations for the purpose
of record capturing.
Action None.
HP0080 Concatenated job operator display mode is ‘ON’
In response to an operator command, HIP will display internal job
status while in a concatenated job mode.
Action None.