Xerox DocuPrint 180, Message Manual

Page: 162 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-84 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
OS4820 Power interruption.
A power failure has occurred, or the system was inadvertently turned
off.
Action Reboot the system when power is restored.
OS4900 System disk write protected: reset write protect and enter
‘RETURN’ when done.
The write protect switch on the system disk drive is on; files on the
system disk cannot be changed or deleted.
Action 1. Turn the write protect switch on the system disk drive to the
OFF position.
2. Press the <ENTER> or <RETURN> key.
OS4990 System reliability log data being lost. Use “PROBLEM”
The disk-resident system error log is full. Output can be resumed, but
errors will no longer be logged.
The printer control console displays:
OUTPUT STOPPED--SEE MESSAGE AT CRT
Action 1. Enter the PROBLEM command to obtain the SAN code
numbers.
2. Contact your systems specialist or Xerox Customer Service.
Note: CRT refers to the Xerox DocuPrint 180 LPS system
controller display.
OS4995 Use problem at earliest opportunity.
The system Error Log is nearly full.
Action Use the PROBLEM command to avoid loss of error log information.
(Refer to the problem solving chapter in your
Xerox DocuPrint 180
LPS Operator Guide .)