Xerox DocuPrint 180, Message Manual

Page: 103 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 6-25
OS1326 Already in lockout mode
During service activities, the LOCKOUT mode has already been
initiated.
Action None.
OS1329 BINFULL criteria: n% ream threshold, n% boundary
After entering the BINFULL command with threshold and boundary
parameters, this message tells you that the values you have entered
are accepted. If you enter the BINFULL command with no
parameters, the message tells you the current settings.
Action None.
OS1330 XPS Accounting reset
XPS deletes all accounting files and recreates and initializes the
accounting recovery file.
Action Enter XPS command.
OS1331 XPS Accounting aborted
XPS has stopped accumulating accounting data because there is a
disk access error.
Action None.
OS1332 XPS Accounting resumed
XPS resumes the accumulation of accounting data because the
problem causing the abort is resolved.
Action None.
OS1333 XPS Accounting stopped: maximum file count exceeded
XPS has stopped accumulating accounting data because the
number of files has reached the maximum specified by ACFILES in
HIP.LIB.
Action None.
OS1334 Printer alarm is n, level = n
After entering the ATTENTION ALARM command, this message tells
you whether the alarm is enabled or disabled. If you enter the
ATTENTION ALARM ENABLE command, the message tells you that
the value you requested is accepted or provides the current setting if
you have not included the parameter with the command.
Action None.