Xerox DocuPrint 180 Message Manual Download Page 152

Page: 152 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

6-74

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE

OS3008

Transparencies loaded--print simplex to sample tray.

Transparencies were loaded in selected tray. JSL did not specify
simplex printing or delivery to the sample tray. The job will not print.

The printer control console displays:

JOB CANNOT BE PRINTED. SEE MESSAGE AT CRT.

Action

1. Recode JSL, including required specifications.

2. Restart the job.

OS3009

Remove top sheet in compiler tray. See printer message.

There is an extra sheet in the collection area of the stitcher/stacker.
Follow the instructions on the printer display.

Action

1. Raise the stitcher/stacker lid and remove the extra sheet from

the collection area.

2. Press the <CON> key to resume printing.

Summary of Contents for DocuPrint 180





































































































































































































































































































































































Search results

Summary of Contents for DocuPrint 180

Reviews:

Related manuals for DocuPrint 180

Brands by name

Popular brands

Xerox DocuPrint 180, Message Manual

Search results

Summary of Contents for DocuPrint 180

Reviews:

Related manuals for DocuPrint 180

Brands by name

Popular brands