Xerox DocuPrint 180, Message Manual

Page: 233 / 356

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 12-1
12. 12 SFS (status file services
command) messages
The following messages refer to the status file services (SFS)
command, which creates, clears, displays, prints, and stores status
file information. Refer to your
Xerox DocuPrint 180 LPS Operations
Reference chapters on tracking system activity and managing
system resources for detailed information about the SFS command.
SF1000 Job completed successfully.
The system has completed internal process required for requested
Status File activity (hardcopy print, save on tape, etc.).
Action None.
SF1100 Task abort.
The system is unable to complete the SFS task because the status
file is missing or inaccessible.
Action 1. Reenter the SFS command.
2. If the problem recurs, enter the SFS? or SFS CREATE
command to recreate the Status File
SF1200 Error in user created form file.
The SFS file name command was entered to create a “user-created”
form. A keyword or value in the form was entered incorrectly (invalid
characters, wrong number of characters, etc.); a comma or
semicolon is missing between commands; or a required command is
missing. The form will not be produced.
Action Reenter the SFS file name and form commands to retry creating the
form.
SF2000 *Hit any key for more*
The SFS DISPLAY command was entered. The Status File contains
more information than will fit on the system controller display at one
time.
Action Press any key on the keyboard to display additional status
information.