Xerox DocuPrint 180, Message Manual

Page: 100 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-22 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
OS1285 Message does not exist. Requesting task: ******;
OS1287 Should not display this message. Requesting task: ******;
The message file containing the message that should be displayed
for the indicated task does not exist on the system disk.
Action 1. Document circumstances of the message appearance.
2. Record any additional messages displayed in conjunction with
it.
3. Contact your systems specialist or Xerox Customer Service
with the above information.
Note: Messages OS1285 and OS1287 should not appear. If one of
these messages should occur:
OS1290 Cluster file full
The file containing the list of clusters is full.
Action Delete one or more clusters, and retry.
Note: The file can only contain 152 clusters
OS1291 Cluster name not defined.
or
Cluster <cluster-name> ***
Cluster has no current trays ***
You have entered a PQA command or a job start command
containing an undefined cluster or one with no current trays.
Action 1. Verify the clusters to be used for your job.
2. Reenter the PQA command.
OS1292 Command ignored.
Main or Aux Cluster not selected
The FEED command can only cause the system to toggle between
the MAIN and AUX clusters. Since neither MAIN nor AUX had been
selected, this command has been ignored.
Action Enter the name of the specific cluster you wish to select. (Refer to
your
Xerox DocuPrint 180 LPS Operations Reference chapter on
setting up print jobs for additional information.)
OS1293 Feed Main/Aux not in effect, unable to toggle
The system is unable to switch (toggle) between the main and
auxiliary feeder trays.
Action Check your cluster configuration and enter a new command that will
allow toggling. (Refer to the chapter on feeder trays in your
Xerox
DocuPrint 180 LPS Operations Reference
.)