Xerox DocuPrint 180, Message Manual

Page: 257 / 356

SUMMARY SHEET ERROR MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 14-15
Master error messages
Master Error (page n):
Disk problem with insert file: “fileType>fileName.”
An error was found while reading the system disk. The system disk
has one or more bad sectors which are not in the bad block file.
Action 1. Rename the file to a well-known name (e.g., BADBKn.SYS).
2. Recopy the file to the LPS.
3. Resend the document.
xDocument aborted because previous error may have been
unique to this copy.
During the processing of an IFCOPY body, an error was found.
Processing the document was ended.
Action 1. Address the prior messages.
2. Resend the document.
Font problem; bad font name; all blanks?
The currently-defined font family could not be processed. No family
substitution is attempted.
Action None.
Font problem; Font “fileType>localFontName” unknown; check
“JSL>IPFNTS.”
Font family mapping points to an LPS font that does not exist.
Action Reenter the ADD command for the FIS family
or
Load the LPS font file(s) from a backup source.
Font problem; font “interpressFontName” does not contain n
point (rotated n degrees) characters.
The Interpress family mapping does not contain the requested
orientation, or the user has turned off point size substitution and the
Interpress family mapping does not contain the requested point size.
Action Invoke the FIS utility to add the desired orientation or allow point size
substitution for the Interpress family via the IFU SUBSTITUTE
command.