Xerox DocuPrint 180, Message Manual

Page: 304 / 356

XEROX DOCUPRINT 180 LPS ADDITIONAL MESSAGES
15-38 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
FCG Exiting: Invalid Profile Encountered.
The following message is displayed if the information necessary for
the FCG SHOW command is not present on the system.
Action None.
FCG Exiting: Invalid profile—missing semicolon (;)
A semicolon is required at the end of a profile label and its
parameters. You have failed to enter the semicolon.
Action None.
FCG Exiting: Invalid Profile—Output or input not specified
The profile requires OUT135 prior to parameter 1 to determine if
these values are to be used for an output profile. if OUT135 has not
been included in the specified profile, the following message is
displayed:
Action None.
FCG Exiting: Invalid profile—too many parameters.
You have exceeded the acceptable number of parameters allowed in
the profile.
Action None.
FCG Exiting: Invalid profile—not enough parameters.
You have specified too few parameters in the profile.
Action None.
FCG Exiting: PVNUM.SYS not present on system
Necessary information for the FCG SHOW command is not in the
system.
Action None.
FCG Exiting: Profile for %0 successfully loaded
The profile you have requested has been found and its parameters
have been loaded.
Action None.
FCG Starting: Version: %0
You have entered a correct profile label. The appropriate version
number is also displayed.
Action None.