Xerox DocuPrint 180, Message Manual

Page: 250 / 356

SUMMARY SHEET ERROR MESSAGES
14-8 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
Fatal error messages
Fatal Error:
Incorrect size for jobAccount name; the size must be between 1
and 31 characters inclusive.
The jobAccount name taken from the document exceeded the length
of the allowable range.
Action Reduce the size of the jobAccount name and resend the document.
Fatal Error (page n):
Bad master (HST) file format; retransmit.
An error was found in the format of the Interpress master.
Action Retransmit the document.
Data Block preamble incorrectly formatted.
The magnetic tape Interpress job stream is formatted incorrectly; i.e.,
the protocol data surrounding the Interpress master is incorrect.
Action 1. Recreate the tape.
2. Retry the document.
Data integrity check failed.
A checksum failed on a magnetic tape Interpress job.
Action 1. Recreate the tape.
2. Retry the document.
Data loss; Host processor (HIP) reclaimed spool space.
An attempt to read a portion of the document failed because the host
interface processor (HIP) has already reused the spool space.
Action 1. Resend the document and send no others until the document
has completed printing.
2. If the error continues, increase the size of the spool space by
modifying HIP.LIB.
ENCODED VECTOR not well-defined.
An error in the format of a printing instruction property vector was
detected.
Action None.