Xerox DocuPrint 180, Message Manual

Page: 228 / 356

SCALE COMMAND MESSAGES
11-4 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
**File type in output name must be xxxx
The file type in the output name must be from an acceptable font
directory.
Action Reenter the output name using a font from the specified directory.
Acceptable file types are FNT, FN6, FR6, LG0, and LG6. (Refer to
your
Xerox DocuPrint 180 LPS Operations Reference chapter on
managing LPS resources for additional information.)
**File, xxxx, can not be scaled (unknown error)**
The requested file cannot be scaled due to an unknown error.
Action Contact your systems specialist or Xerox Customer Support.
**Font file xxxx cannot be scaled (byte escapement)**
The requested font file cannot be scaled due to a problem with byte
escapement.
Action 1. If you are not using an Interpress font, add switch “A” (assign
escapement) to the SCALE command line. (Refer to your Xerox
DocuPrint 180 LPS OSS Program Description, -11.)
2. If the message reappears, contact your systems specialist or
Xerox Customer Support.
**Font file, xxxx, cannot be scaled (extended metrics)**
The requested font file cannot be scaled due to a problem with
extended metrics.
Action 1. Use the IFU ADD command to get the correct point size. (Refer
to your Xerox DocuPrint 180 LPS Operations Reference
chapter on HIP-accessed communicating modes for additional
information.)
2. If the message reappears, contact your systems specialist or
Xerox Customer Support.
**Font file, xxxx, cannot be scaled (graphic font)**
The requested font file cannot be scaled because the resulting file
would not be compatible with the original.
Action None
**Font index in TL does not match font list.
The font index in the text line does not match the font list. The FRM
file is probably corrupted or created incorrectly.
Action 1. Recreate the FRM file using FDL and retry the SCALE
command.
2. If the message reappears, contact your systems specialist or
Xerox Customer Support.