Xerox DocuPrint 180, Message Manual

Page: 219 / 356

PR (HARDCOPY GRAPHICS PRINTING COMMAND) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 9-3
PR2985 Security violation.
The requested file has been secured by the ABNORMAL SECURITY
= YES command. An attempt was made to access it at a wrong logon
level.
Action To access the file, obtain the correct password and logon at Level 5.
(Refer to your
Xerox DocuPrint 180 LPS Operations Reference
chapter on setting LPS parameters for additional information.)
PR9400 Error during file directory search.
A disk error occurred while the system was searching for a requested
file.
Action 1. Retry the HARDCOPY command.
2. If the problem continues, contact your systems specialist or
Xerox Customer Service.
PR9500 Error during xcs file creation.
A disk error occurred while a .XCS file sent from a workstation was
being created on disk. File creation is aborted.
Action 1. Resend the file.
2. If the problem recurs, contact your systems specialist or Xerox
Customer Service.
PR9520 Cannot open RECTSK.SYS.
The system is unable to initiate job recovery after a software failure
because a hardware error makes the recovery file inaccessible.
Action 1. Restart the job.
2. If the message reappears, contact your systems specialist or
Xerox Customer Service.