Xerox DocuPrint 180, Message Manual

Page: 83 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 6-5
OS0730 Finishing exerciser utility: Successful Exit.
FEX has successfully completed.
Action None.
OS0731 Updating the IOT‘S memory with test profile info
FEX is loading into the printer‘s non-volatile memory the new
finishing parameters profile you have specified.
Action None.
OS0732 Finishing exerciser is starting requested print job
FEX has created the test job and is starting to run it.
Action None.
OS0731 Updating the IOT‘S memory with test profile info
FEX is loading into the printer‘s non-volatile memory the new
finishing parameters profile you have specified.
Action None.
OS0732 Finishing exerciser is starting requested print job
FEX has created the test job and is starting to run it.
Action None.
OS0733 Finishing exerciser utility (FEX) starting . . .
The system responds with this message after you have entered the
FEX command.
Action None.
OS0734 Finishing exerciser utility: working . . .
FEX is in communication with the printer.
Note: This message may appear numerous times during the FEX
session.
Action None.
OS0800 NVM update in progress
****DO NOT DISTURB****
The periodic acquisition of information from the printer control
console is in progress.
Action Do not disturb.