Xerox DocuPrint 180, Message Manual

Page: 138 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-60 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
OS2660 Do you want to enter Accounting? [Y or N]
or
Do you want to enter Accounting? Type Y for 2000
reports or N for 100 reports.
(This message appears at the end of the sysgen process.) To set the
size of the status file:
Action Enter Y to create an accounting file for 2000 reports.
or
Enter N to create an accounting file for 100 reports. (Refer to your
Xerox DocuPrint 180 LPS System Generation Guide .)
0S2669 Enter ‘PQA Start’ to initiate a Print Quality Adjustment.
Print Quality Adjustment (PQA) is not pending. Therefore, enter the
PQA START command to start the PQA process.
Action None.
OS2670 Enter PQA or SUB INK Command or Abort Report or Print Job.
The color housing is not ready. This message is displayed when the
system requires a print quality adjustment (PQA).
Action Enter the PQA command to initiate print quality adjustment
or
Substitute an ink via the SUBSTITUTE INK command
or
Abort the job.
OS2671 Enter ‘PQA CANCEL’ to cancel Print Quality Adjustment.
This message is displayed when print quality adjustment is pending.
Action Enter PQA CANCEL to stop print quality adjustment
or
Enter CONTINUE to initiate PQA.
OS2672 Enter PQA Command again.
Your PQA command was not completed successfully.
Action Reenter the PQA command again or take other actions specified in
the message.