Xerox DocuPrint 180, Message Manual

Page: 28 / 356

HIP (HOST INTERFACE PROCESSOR) MESSAGES
4-6 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
HP1210 Host online. Accepting all jobs
The HIP ONLINE ALL command was entered. The printer and
remote host are communicating, and the host is sending jobs to the
HIP buffer. All print and nonprint files (fonts, forms, or JSLs) will be
accepted.
Action Enter the HIP START command at the system controller keyboard to
initiate printing.
HP1220 Host online. Accepting print jobs only
The HIP ONLINE command was entered. The printer and the remote
host are communicating, and the host is sending jobs to the HIP
buffer. Only files to be printed will be accepted.
Action Enter the HIP START command at the system controller keyboard to
initiate printing.
HP1230 Host offline
The HIP OFFLINE or RESET command was entered. The printer
and remote host are no longer communicating.
Action None.
HP1240 Host not responding
The HIP START command was entered but the host is not online and
communicating with printer. (This message is displayed every 30
seconds until the host comes online or the interface is terminated.)
Action 1. If using XPAF, contact your systems specialist or Xerox
Customer Service.
2. If the failure recurs, call for service.
HP1242 Online interface waiting for communications
HIP is online to the XPAF host and waiting for communications.
Action None.
HP1246 Receiving communications from host
The host has established the data communications link.
Action None.
HP1250 Transmission complete: job id xxxx
The host has completed sending the indicated job to the printer. The
job will now begin printing.
Action None.