1
QT6-2184-V01
PRINTED IN XXXXXXXX
XXXXXXXX
© CANON INC. 2017
479
It is recommended that you reserve space of the following dimensions to allow you to work around the printer.
Check the completed image of the printer you purchased and make sure you have enough space to install the printer.
In order to ensure that this product is used safely, be sure to read the precautions.
-> Quick Guide (separate manual)
Before Setting Up the Printer
Read this manual before attempting to operate the printer.
Keep this manual in a handy location for future reference.
Set up the printer using the following procedure.
• Windows is a trademark or registered trademark of Microsoft Corporation in the
U.S. and/or other countries.
TX-2000
Installation space (W x D x H)
• When not using the stand
59.5 x 56.5 x 40.2 inches (1510 x 1434 x 1020 mm)
• When using the stand
59.5 x 66.3 x 61.5 inches (1510 x 1684 x 1560 mm)
TX-3000
Installation space (W x D x H)
70.5 x 66.3 x 61.5 inches (1790 x 1684 x 1560 mm)
TX-4000
Installation space (W x D x H)
78.5 x 66.3 x 61.5 inches (1993 x 1684 x 1560 mm)
Confirming the Installation Space
Overview of Setup
Important
• The printer stand and roll unit may be options depending on the model. Care is required because the required space may differ depending on whether or not the
options are used.
• The space required in front of the printer differs on how the basket supplied with the printer stand is used. This shows the installation space when used in the
position in the illustration.
Caution
• Instructions in this Setup Guide show the TX-4000 printer. Note that your printer may look different from these illustrations in some cases. However, the basic
operations are the same.
RMC (Regulatory Model Code): K10475
RMC (Regulatory Model Code): K10474
RMC (Regulatory Model Code): K10473
If an error message appears during setup or other problems occur,
refer to "Responding to Messages" on p.14.
Setup Guide
Introductory Information
ENGLISH
• Check this also after setup is complete.
3.9 inches
(100 mm)
(When not using
the stand)
3.9 inches (100 mm)
(When using the
stand)
23.6 inches
(600 mm)
(When using the stand)
(When not
using the stand)
5.9 inches (150 mm)
7.9 inches
(200 mm)
7.9 inches
(200 mm)
23.6 inches
(600 mm)
7.9 inches
(200 mm)
7.9 inches
(200 mm)
23.6 inches
(600 mm)
3.9 inches
(100 mm)
5.9 inches
(150 mm)
7.9 inches
(200 mm)
7.9 inches
(200 mm)
23.6 inches
(600 mm)
3.9 inches
(100 mm)
5.9 inches
(150 mm)
*
Assemble the Stand
(P.3)
* Refer to the separate
manual
Attach the Alignment Rod
(P.3)
Install the Printer
(P.3)
*
Attach the Roll Unit
(P.5)
* Refer to the separate
manual
*
Attach the Basket
(P.5)
* Refer to the separate
manual
*
Assemble the Stacker
(P.5)
* Refer to the separate
manual
Turn On the Printer
(P.5)
Install the Ink Tanks
(P.7)
Install the Print Head
(P.9)
Load the Paper
(P.10)
Storage Locations
(P.13)
How to Display the Online Manuals
(P.14)
• Perform Print Head Adjustment
and Select the Connection Method
(P.11 ~ 12)
• Connect to the Printer
