Xerox DocuPrint 180, Message Manual

Page: 82 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-4 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
OS0510 Input stopped
The STOP or STOP I command was entered, or the <STOP> key
was pressed. The system has stopped transmitting data and is
reading it onto the system disk.
Action To restart:
Enter CONTINUE or CONTINUE I command
or
Press the <CON> key.
OS0610 Page spacing forward
The SPACE n PAGES command was entered. The system is
skipping forward over a specified number of pages in the current job.
Action None.
OS0620 Page spacing backward
The SPACE -n PAGES command was entered. The system is
skipping backward over a specified number of pages in the current
job.
Action None.
OS0630 Page spacing complete.
Total pages spaced: xx.
Simplex data pages: xx.
Simplex nondata pages: xx.
Duplex data pages: xx.
Duplex nondata pages: xx.
Confirms that a SPACE n PAGES command has completed.
Action None.
OS0700 Cluster xx now deleted
A command was entered that caused both the current and the
preferred lists of feeder trays for the cluster to be empty. The cluster
has been deleted from the internal database.
Action None.
OS0720 Paper tray not found in any cluster
CLUSTER n or CLP n was entered, but the specified feeder tray was
not found in any cluster.
Action Check the cluster and assign a valid feeder tray. (Refer to your Xerox
DocuPrint 180 LPS Operations Reference chapter on setting up print
jobs for additional information.)