background image

E-1

PC-410 

Paper Feed Cabinet

INSTALLATION MANUAL

A2XM-9557-00

Applied Machines: C554e/C454e/C364e/C284e/C224e/C554/C454/C364/C284/C224/C368/C308/554e/454e/364e/

284e/224e

COLOR MFP: 55 ppm/45 ppm/36 ppm/30 ppm/28 ppm/22 ppm

MFP: 55 ppm/45 ppm/36 ppm/28 ppm/22 ppm

Product Code: A5AY/A5C0/A5C1/A5C2/A5C4/A2XK/A4FJ/A161/A4FK/A4FM/A7PU/A7PY/A61D/A61E/A61F/A61G/

A61H

Caution:

Lifting the machine in an awkward position or 
transporting it in a poorly balanced position could 
result in personal injury. When transporting the 
machine, assign an adequate number of persons 
to the job and ensure that each person can take a 
good position of not being excessively loaded 
(mass: approx. 23 kg (50-11/16 lb)).

1. Accessory parts

Note:

This manual provides the illustrations of the acces-
sory parts and machine that may be slightly differ-
ent in shape from yours. In that case, instead of 
the illustrations, use the appearance of your 
machine to follow the installation procedure. This 
does not cause any significant change or problem 
with the procedure.

Caution:

When removing the paper feed cabinet from its 
shipping carton, do not hold the reinforcement 
bracket (as a personal injury or a deformed frame 
could result).

No.

Name

Shape

Q’ty

1. Leg assy

4

2. Fixing

bracket A

3

3. Fixing

bracket B

1

4. Screw

5

5. Installation 

manual

1

set

Keep this bag away from babies and 
children. Do not use in cribs, beds, 
carriages, or playpens.

The thin film may cling to nose and 
mouth and prevent breathing. This bag is 
not a toy.

Reinforcement bracket

Summary of Contents for PC-410









Reviews: