Xerox DocuPrint 180, Message Manual

Page: 51 / 356

IFU (INTERPRESS FONT UTILITY) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 5-13
IF2336 Map x was not found in IPFNTS.SYS
The requested Interpress character mapping is not found in the
character mapping tables that are stored in the IPFNTS.SYS file.
Action Modify the font profile to refer to an existing map in the IPFNTS.SYS
file.
IF2342 Operation code must be a symbol
When entering the original command line, the system did not
encounter the READ or WRITE parameter.
Action Reenter the command line, specifying either a READ or WRITE
parameter.
IF2344 Operation code must be read or write
A READ or WRITE parameter was not specified in the command line.
Action Reenter the command line, specifying either a READ or WRITE
parameter.
IF2346 Family xxx not found in family directory
In attempting to delete or list the requested family from the directory,
either the naming authority, character code, or type style does not
exist.
Action None.
IF2400 FIS name is not in easy value
The font name specified in the FIS font master does not match the
font name specified in the font profile.
Action None.
IF2402 No CCID parameter has been specified
No CCID (character code identifier) parameter has been specified in
the font profile.
Action 1. Enter a CCID parameter in the font profile.
2. Reenter the ADD command.
IF2408 CHARS parameter was not found in IPFONTS statement
The IPFONTS statement in the font profile does not contain the
CHARS (enumeration or range of point sizes) parameter.
Action 1. Enter the CHARS parameter in the IPFONTS statement of the
font profile.
2. Reenter the ADD command.