Xerox DocuPrint 180, Message Manual

Page: 170 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-92 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
OS6500 Cannot validate first data record; space to next report.
The tape record or block does not conform to the description in JSL.
Action 1. Enter the SPACE 1 REPORTS command to go to the next
report. Recreate the lost report.
2. Rerun the lost report.
IF THIS MESSAGE APPEARS WITH “LABEL ERROR” MESSAGE:
Continue pressing the <CON> key until the job prints. (See
recommended actions for messages OS6010-OS6090.)
OS6520 Cannot read index page data block.
The system cannot read the index page data block due to a hardware
malfunction on the system disk.
Action Contact your systems specialist or Xerox Customer Service.
OS6550 Data not formatted as specified; space to next report.
JSL does not correctly describe the record or block format.
Action 1. Enter the SPACE 1 REPORTS command to go to the next
report.
or
Enter the ABORT job# command to cancel the job.
2. Recode the JDL statements. (Refer to the online and offline
chapters in your Xerox DocuPrint 180 LPS Operator Guide .)
3. Restart the job.
OS6551 Problem found in block number nn.
A problem was found while reading block number nn from the input
data stream.
Action None
OS6555 Interpress data extraction error.
An error has occurred when the software was decoding information
from the Interpress master for use by the Xerox DocuPrint 180 LPS.
Action 1. Check for additional messages or instructions on the keyboard
display.
2. Contact your systems specialist or Xerox Customer Service if
the problem continues.
OS6560 Error encountered during Interpress job.
An error has occurred while running an Interpress job.
Action 1. Check for additional messages or instructions on the keyboard
display.
2. Contact your systems specialist if the problem continues.