Xerox DocuPrint 180, Message Manual

Page: 165 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 6-87
c. If there are no JSL errors, enter the START n, DUMP command
to obtain a tape dump for analysis.
d. Recreate the job with correct tape labels. (Refer to your Xerox
DocuPrint 180 LPS Tape Formats Manual .)
Note: Check output. One or more pages may be formatted
incorrectly and parts of the label may print as data on a separate
sheet.
OS6050 Host requested job abort. Job terminated.
The HIP job was aborted at the host. The job is being cancelled.
Action Done.
OS6052 HIP recovered spool space, data loss...job cannot proceed.
A system rollover has occurred. Input cannot recover the current HIP
job because data is no longer available.
Action Resend the job.
OS6080 LBLLIB.SYS file not found.
The label processing the library file does not exist on disk. The job
will abort.
Action Resysgen, if authorized to do so. (Refer to your Xerox DocuPrint 180
LPS System Generation Guide .)
or
Contact your systems specialist.
OS6090 Label error: Illegal block length; Continue or Abort?
Refer to the explanation for messages OS6010 - OS6042.
Action None.
OS6101 RTEXT file not found.
The file for the Routing Text statement specified in JDE is not on disk.
Action 1. Create an RTEXT statement as a new file on the system disk.
(Refer to your Xerox DocuPrint 180 LPS PDL Reference .)
2. Restart the job.