Waters Xevo G2 QTof, Operator'S, Overview And Maintenance Manual, Page: 236 / 248

B-26 External Connections
Connecting to the electricity source
The mass spectrometer requires a separate, grounded electricity source. The
ground connection in the electrical outlet must be common and connected near
the system.
To connect to the electricity source:
Recommendation:
Use a line conditioner or an uninterruptible power supply
(UPS) for optimum long-term input voltage stability.
1. Connect the female end of the power cord to the receptacle on the rear
panel of the mass spectrometer (see the figure on page B-2 ).
2. Connect the male end of the mass spectrometer power cord to a suitable
200 to 240 V a.c. wall outlet.
Connecting the NanoLockSpray source camera
The NanoLockSpray™ source camera is connected to the workstation PC
through a USB converter.
Warning:
To avoid electrical shock, use the SVT-type power cord in the
United States and HAR-type (or better) in Europe. For information
regarding what cord to use in other countries, contact your local Waters
distributor.
External Connections 2
10 1
External Connections 1
10 1
System Activity
1 2 3 4 5 6 7 8 9 10
+ -
Event In 1
External Connections 1
Not used
CE Interlock
OUT
+ -
Event In 2
Not used
- IN IN
Com N/C N/O
Com N/C N/O
1 2 3 4 5 6 7 8 9 10
+ -
Analogue Out
External Connections 2
OUT
Gas Fail Interlock
Not used
- OUT OUT
+ -
Event Out 1
+ -
Event Out 2
OUT
-
Video Output
Service Bus
Instrument LAN
EPC Com Port
EPC Parallel Port
Video output connector
Workstation
USB converter