Waters Xevo G2 QTof, Operator'S, Overview And Maintenance Manual, Page: 234 / 248

B-24 External Connections
To make signal connections:
1. Determine the signal connection location from the silk-screened label on
the rear panel of each instrument.
2. Attach the positive and negative leads of the signal cable to the
connector.
3. Slide the clamp (with the bend facing down) into the protective shield.
4. Insert the clamp and shield (with the bend facing down) into the
connection cover, and loosely tighten with one self-tapping screw.
TP02585
Signal cable
Connector
TP02586 Connection cover
Shield
Clamp