manualshive.com logo in svg

WAGO 750-8202/040-001, Manual

The WAGO 750-8202/040-001 is a powerful programmable fieldbus controller designed for industrial automation. Control your processes with precision using this high-quality product. Download its user manual for free from our website to unlock its full potential. Get your hands on the manual and start using your device with ease.

Share
Download
background image

392  List of Tables 

WAGO I/O SYSTEM 750 XTR 

 

 

750-8202/040-001 PFC200 2ETH RS TELE XTR 

Manual 

 

Version 1.2.0, valid from FW Version 03.01.07(13) 

 

 

List of Tables 

Table 1: Number Notation .................................................................................... 16

 

Table 2: Font Conventions ................................................................................... 16

 

Table 3: Legend for Figure “View” ....................................................................... 28

 

Table 4: Legend for Figure “Power Jumper Contacts” ......................................... 32

 

Table 5: Legend for Figure “CAGE CLAMP

®

 Connectors” .................................. 33

 

Table 6: Service Interface .................................................................................... 34

 

Table 7: Legend for Figure “Network Connections – X1, X2” .............................. 35

 

Table 8: Legend for Figure “RS-232/RS-485 – Communication Connection –  

X3” .............................................................................................................. 36

 

Table 9: Function of RS-232 Signals for DTE/DCE ............................................. 37

 

Table 10: Legend for Figure “Power Supply Indicating Elements” ...................... 39

 

Table 11: Legend for Figure “Fieldbus/System Indicating Elements” .................. 40

 

Table 12: Legend for Figure “Indicating Elements, Memory Card Slot” ............... 41

 

Table 13: Legend for Figure “Indicating Elements, RJ-45 Jacks” ........................ 42

 

Table 14: Mode Selector Switch .......................................................................... 43

 

Table 15: Mode Selector Switch .......................................................................... 43

 

Table 16: Technical Data – Device ...................................................................... 47

 

Table 17: Technical Data – System Data ............................................................ 47

 

Table 18: Technical Data – Supply ...................................................................... 48

 

Table 19: Technical Data – Clock ........................................................................ 49

 

Table 20: Technical Data – Programming ........................................................... 49

 

Table 21: Technical Data – Local Bus ................................................................. 49

 

Table 22: Technical Data – ETHERNET ............................................................. 50

 

Table 23: Technical Data – Communication Interface ......................................... 50

 

Table 24: Technical Data – Field Wiring .............................................................. 50

 

Table 25: Technical Data – Power Jumper Contacts .......................................... 50

 

Table 26: Technical Data – Data Contacts .......................................................... 50

 

Table 27: Technical Data – Mechanical Conditions ............................................. 51

 

Table 28

: Technical Data ‒ Climatic Environmental Conditions

 .......................... 51

 

Table 29: Standards and Rated Conditions for Explosion Protection  

Applications ................................................................................................ 53

 

Table 30: Climatic and Mechanical Environmental Conditions and  

Shipbuilding ................................................................................................ 54

 

Table 31: EMC – Immunity to Interference .......................................................... 55

 

Table 32: EMC – Emission of Interference .......................................................... 57

 

Table 33: Standards and Rated Conditions for Rail Applications (EN 50155) ..... 58

 

Table 34: WBM Users .......................................................................................... 61

 

Table 35: Linux

®

 Users ........................................................................................ 61

 

Table 36: List of Parameters Transmitted via DHCP ........................................... 69

 

Table 37: Components of the Cloud Connectivity Software Package ................. 72

 

Table 38: Loading a Boot Project ........................................................................ 80

 

Table 39: WAGO DIN Rail ................................................................................... 85

 

Table 40: Permissible WAGO Carrier Rails When Using XTR PFC200 .............. 85

 

Table 41: Filter Modules for 24 V Power Supply ................................................. 93

 

Table 42: Legende for Figure “Power Supply Concept” ...................................... 94

 

Table 43: Legend for Figure “Power Supply Example” ........................................ 96

 

Table 44: WAGO Ground Wire Terminals ........................................................... 98

 

Summary of Contents for 750-8202/040-001

















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 750-8202/040-001

ABB FEPL-02 Ethernet POWERLINK Quick Installation And Start-Up Manual preview
FEPL-02 Ethernet POWERLINK
Brand: ABB Pages: 2
ABB FENA-01 Quick Installation And Start-Up Manual preview
FENA-01
Brand: ABB Pages: 2
Samson 3510 Mounting And Operating Instructions preview
3510
Brand: Samson Pages: 48
Mako Networks 6000 Series Quick Installation Manual preview
6000 Series
Brand: Mako Networks Pages: 15
ABATEC A1 Installation And Operation Instruction Manual preview
A1
Brand: ABATEC Pages: 8
M&C 701 Instruction Manual preview
701
Brand: M&C Pages: 16
Hankscraft Runxin HD Series Service Manual preview
HD Series
Brand: Hankscraft Runxin Pages: 53
Fanimation BTCR9 Quick Start Manual preview
BTCR9
Brand: Fanimation Pages: 2
M2M C600 Technical Manual preview
C600
Brand: M2M Pages: 24
Vaillant VRT 340f Operating Instruction preview
VRT 340f
Brand: Vaillant Pages: 32
Vaillant VRT 330 Manual preview
VRT 330
Brand: Vaillant Pages: 27
Vaillant VRC 470 Operating Instructions Manual preview
VRC 470
Brand: Vaillant Pages: 40
Vaillant VRT 350f Installation Instructions Manual preview
VRT 350f
Brand: Vaillant Pages: 36
Vaillant VRT 350 Installation Instructions Manual preview
VRT 350
Brand: Vaillant Pages: 28
Vaillant VAZ CPC Operating Instructions Manual preview
VAZ CPC
Brand: Vaillant Pages: 92
I-Tork PDS Series Installation & Operation Manual preview
PDS Series
Brand: I-Tork Pages: 15
MGC RAXN-LCD Installation And Wiring Manual preview
RAXN-LCD
Brand: MGC Pages: 16
FUTABA FP-4NBF Instruction Manual preview
FP-4NBF
Brand: FUTABA Pages: 8

Brands by name

Popular brands

Load more brands