WAGO I/O SYSTEM 750 XTR
Commissioning 219
750-8202/040-001 PFC200 2ETH RS TELE XTR
Manual
Version 1.2.0, valid from FW Version 03.01.07(13)
7.8.1.50.9 “Ports and Services” > “DHCPD” Submenu
This submenu contains the settings for the DHCPD service.
Table 186: “Ports and Services” > “DHCPD” Submenu
Menu Item
Explanation
0. Back to …
Back to the higher-level menu
1. DHCPD firewalling
Opens a submenu with firewall settings for the this
service for the interfaces
2. X1
Opens a submenu with the DHCPD settings for the
selected interface
3. X2
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press
[Q]
.
7.8.1.50.10 “DHCPD” > “Xn” Submenu
This submenu contains the settings for the DHCPD service for the selected
interface.
Table 187: “Ports and Services” > “DHCPD” > “Xn” Submenu
Menu Item
Submenu Item / Explanation
0. Back to …
Back to the higher-level menu
1. State
Enable/disable the DHCPD service for the Xn
interface.
0. Back to … Back to the higher-level menu
1. Enable
The DHCPD service is enabled.
2. Disable
The DHCPD service is disabled.
2. Range
Enter a range of available IP addresses.
3. Lease Time (min)
Specify the lease time here in seconds. 120
seconds are entered by default.
4. Add static hostname
Enter a new static assignment of MAC ID to IP
address,
e.g., “01:02:03:04:05:06=192.168.1.20” or
“hostname=192.168.1.20”.
You can enter 10 assignments.
(5 + n). Static Host (n)
This displays the static assignments.
0. Back to … Back to the higher-level menu
1. Edit
Opens a submenu to change the
selected assignment
2. Delete
Deletes the selected assignment
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press
[Q]
.
Click
[<OK>]
to apply the entry.
Click
[<Abort>]
to discard the entry.
