manualshive.com logo in svg

WAGO 750-8202/040-001, Manual

The WAGO 750-8202/040-001 is a powerful programmable fieldbus controller designed for industrial automation. Control your processes with precision using this high-quality product. Download its user manual for free from our website to unlock its full potential. Get your hands on the manual and start using your device with ease.

Share
Download
background image

WAGO I/O SYSTEM 750 XTR 

List of Figures  389 

750-8202/040-001 PFC200 2ETH RS TELE XTR 

 

 

 

Manual 

 

Version 1.2.0, valid from FW Version 03.01.07(13) 

 

List of Figures 

Figure 1: View ...................................................................................................... 28

 

Figure 2: Marking Area for Serial Numbers ......................................................... 30

 

Figure 3: Data Contacts ....................................................................................... 31

 

Figure 4: Power Jumper Contacts ....................................................................... 32

 

Figure 5: CAGE CLAMP

®

 Connectors ................................................................. 33

 

Figure 6: Service Interface (Closed and Open Flap) ........................................... 34

 

Figure 7: Network Connections – X1, X2 ............................................................. 35

 

Figure 8: RS-232/RS-485 – Communication Connection – X3 ............................ 36

 

Figure 9: Termination with DTE-DCE Connection (1:1) ....................................... 37

 

Figure 10: Termination with DCE-DCE Connection (Cross-Over) ....................... 37

 

Figure 11: RS-485 Bus Termination .................................................................... 38

 

Figure 12: Power Supply Indicating Elements ..................................................... 39

 

Figure 13: Indicating Elements for Fieldbus/System ........................................... 40

 

Figure 14: Indicating Elements, Memory Card Slot ............................................. 41

 

Figure 15: Indicating Elements, RJ-45 Jacks ...................................................... 42

 

Figure 16: Mode Selector Switch ......................................................................... 43

 

Figure 17: Reset Button ....................................................................................... 44

 

Figure 18: Slot for SD Memory Card ................................................................... 45

 

Figure 19: Schematic Diagram ............................................................................ 46

 

Figure 20: Connecting the Controller to a Cloud Service (Example) ................... 71

 

Figure 21: Mounting Positions ............................................................................. 82

 

Figure 22: Spacing ............................................................................................... 86

 

Figure 23: Release Tab of Controller (Example) ................................................. 88

 

Figure 24: Insert I/O Module (Example) ............................................................... 89

 

Figure 25: Snap the I/O Module into Place (Example) ........................................ 89

 

Figure 26: Example for the Arrangement of Power Contacts .............................. 90

 

Figure 27: Connecting a Conductor to a CAGE CLAMP

®

 .................................... 91

 

Figure 28: Power Supply Concept ....................................................................... 94

 

Figure 29: Power Supply Example ...................................................................... 95

 

Figure 30: Carrier Rail Contact (Example) ........................................................... 99

 

Figure 31: Cable Shield at Ground Potential ..................................................... 100

 

Figure 32: Examples of the WAGO Shield Connecting System ........................ 101

 

Figure 33: Application of the WAGO Shield Connecting System ...................... 101

 

Figure 34: “Open DHCP”, Example Figure ........................................................ 105

 

Figure 35: CBM main menu (example) .............................................................. 106

 

Figure 36: CBM – Selecting “Networking” ......................................................... 107

 

Figure 37: CBM – Selecting “TCP/IP” ................................................................ 107

 

Figure 38: CBM – Selecting “IP address” .......................................................... 107

 

Figure 39: CBM – Selecting the IP Address ...................................................... 108

 

Figure 40: CBM – Entering a New IP Address .................................................. 108

 

Figure 41: “WAGO Ethernet Settings” – Starting Screen (Example) ................. 109

 

Figure 42: “WAGO Ethernet Settings” – “Network” Tab .................................... 110

 

Figure 43: Example of a Function Test .............................................................. 112

 

Figure 44: Entering Authentication .................................................................... 118

 

Figure 45: Password Reminder ......................................................................... 119

 

Figure 46: “WAGO Ethernet Settings” – Start Screen ....................................... 231

 

Figure 47: “WAGO Ethernet Settings” – Communication Link ........................... 232

 

Summary of Contents for 750-8202/040-001

















































































































































































































































































































































































































Reviews:

No comments

Related manuals for 750-8202/040-001

Samson 430 Series Mounting And Operating Instructions preview
430 Series
Brand: Samson Pages: 78
Rachio 3 Get Started preview
3
Brand: Rachio Pages: 16
Samson 3296 Mounting And Operating Instructions preview
3296
Brand: Samson Pages: 100
Danfoss JS120 Technical Information preview
JS120
Brand: Danfoss Pages: 16
Radio Shack Remote Control Owner'S Manual preview
Remote Control
Brand: Radio Shack Pages: 3
D-Link DSN-640 Quick Installation Manual preview
DSN-640
Brand: D-Link Pages: 40
T-Verter E2 Series Operating Manual preview
E2 Series
Brand: T-Verter Pages: 121
Happy 1050 Installation & Use Instructions preview
1050
Brand: Happy Pages: 10
Garmin 340 Pilot'S Manual preview
340
Brand: Garmin Pages: 12
Saitek X36 Manual preview
X36
Brand: Saitek Pages: 4
EasyIO FG Series User Manual preview
FG Series
Brand: EasyIO Pages: 12
RMG GSM 3ST User Manual preview
GSM 3ST
Brand: RMG Pages: 6
Gardigo 80000 Instruction Manual preview
80000
Brand: Gardigo Pages: 8
Gardigo 60035 Instruction Manual preview
60035
Brand: Gardigo Pages: 19
Parker ER Series Maintenance Instructions & Parts List preview
ER Series
Brand: Parker Pages: 44
ICP DAS USA MDC-700 Series Quick Start preview
MDC-700 Series
Brand: ICP DAS USA Pages: 4
ICP DAS USA I-7080 Quick Start Manual preview
I-7080
Brand: ICP DAS USA Pages: 6
ICP DAS USA EIP-2000 Series Faq preview
EIP-2000 Series
Brand: ICP DAS USA Pages: 19

Brands by name

Popular brands

Load more brands