WAGO 750-8202/040-001 Manual Download Page 121

Page: 121 / 400

WAGO I/O SYSTEM 750 XTR

Commissioning 121

750-8202/040-001 PFC200 2ETH RS TELE XTR

Manual

Version 1.2.0, valid from FW Version 03.01.07(13)

7.8.1.3 “PLC Runtime Information” Page

All information about the enabled runtime system and PLC program created in

the programming software is provided on the “PLC Runtime Information” page.

7.8.1.3.1 “PLC Runtime” Group

Table 50: WBM “PLC Runtime Information” Page – “PLC Runtime” Group

Parameters

Explanation

Version

The version of the currently activated runtime

system is shown here.

If the runtime system is disabled, “None” is

displayed and the subsequent fields of this group

are disabled.

Web Server Version

This shows the version number of the web server.

This field is only visible when CODESYS 2 is

enabled as the runtime system.

State

The PLC operating state is shown. This field is only

visible when CODESYS 2 is enabled as the runtime

system.
STOP

PLC program is not executed.

RUN

PLC program is executed.

Number of Tasks

The number of tasks in the PLC program is shown.

This field is only visible when CODESYS 2 is

enabled as the runtime system.

7.8.1.3.2 “Project Details” Group

This group is only visible if CODESYS 2 is enabled as the runtime system.

Table 51: WBM “PLC Runtime Information” Page – “Project Details” Group

Parameters

Explanation

Date

This shows the latest storage date of the project.

Title

Display of project information that the programmer

entered in the PLC program (in programming

software under Project > Project Information...).

The information only appears when a PLC program

is run.

Descriptive texts up to 1024 characters long are

given under “Description.”

Version
Author

Description

Checksum

This shows the calculated checksum of the project.

Summary of Contents for 750-8202/040-001

















































































































































































































































































































































































































Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands

WAGO 750-8202/040-001, Manual

Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands