WAGO 750-8202/040-001 Manual Download Page 186

Page: 186 / 400

186 Commissioning

WAGO I/O SYSTEM 750 XTR

750-8202/040-001 PFC200 2ETH RS TELE XTR

Manual

Version 1.2.0, valid from FW Version 03.01.07(13)

7.8.1.42.5 “Information” > “Number of Tasks” Submenu

In this submenu, the number of tasks in the PLC program are displayed.

The submenu only appears when CODESYS 2 is enabled as the runtime system.

Table 133: “PLC Runtime” > “Information” > “Number of Tasks” Submenu

Parameters

Explanation

Number of Tasks

The number of tasks in the PLC program is shown.

To return to the higher-level menu, press

[Q]

[Return]

7.8.1.42.6 “Information” > “Project Details” Submenu

In this submenu, project information from the PLC program is displayed.

The submenu only appears when CODESYS 2 is enabled as the runtime system

and the program is executed.

Table 134: “PLC Runtime” > “Information” > “Project Details” Submenu

Parameters

Explanation

Date

Display of project information that the programmer

entered in the PLC program (in the programming

software under Project > Project Information ...)

Descriptive text with up to 1024 characters is

displayed under “Description”.

Title
Version
Author
Description

To return to the higher-level menu, press

[Q]

[Return]

7.8.1.42.7 “Information” > “Tasks” Submenu

In this submenu, tasks from the PLC program are displayed. An entry is

generated for each task.

The submenu only appears when CODESYS 2 is enabled as the runtime system.

Table 135: “PLC Runtime” > “Information” > “Tasks” Submenu

Menu Item

Explanation

0. Back to …

Back to the higher-level menu

n. Task n

Opens a submenu with information on the selected

task

To make a selection, choose the appropriate menu item.

To return to the higher-level menu, press

[Q]

Summary of Contents for 750-8202/040-001

















































































































































































































































































































































































































Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands

WAGO 750-8202/040-001, Manual

Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands