WAGO I/O SYSTEM 750 XTR
Commissioning 229
750-8202/040-001 PFC200 2ETH RS TELE XTR
Manual
Version 1.2.0, valid from FW Version 03.01.07(13)
7.8.1.51.4 “SNMP” > “SNMP v3 Configuration” Submenu
This submenu contains settings for SNMP v3.
Table 201: “SNMP” > “SNMP v3 Configuration” Submenu
Parameters
Explanation
0. Back to …
Back to the higher-level menu
(n). Username
Opens a submenu with information on the selected
v3 user and to delete the user
(n + 1). Add new v3 User
Opens a series of submenus to create a new v3
user
You can enter 10 users.
The following entries/selections are possible:
• Authentication name (The name can have a
min. 8 and max. 32 characters and may contain
lower case letters (a … z), upper case letters
(A … Z), numbers (0 … 9), special characters
!()*~'.-_ but no spaces.)
• Authentication type (None/MD5/SHA)
• Authentication key (The key can have a min. 8
and max. 32 characters and may contain lower
case letters (a … z), upper case letters (A … Z),
numbers (0 … 9), special characters !()*~'.-_ but
no spaces.)
• Privacy type (None/DES/AES)
• Privacy key (The key can have a min. 8 and
max. 32 characters and may contain lower case
letters (a … z), upper case letters (A … Z),
numbers (0 … 9), special characters !()*~'.-_ but
no spaces.)
• IP address for a trap receiver for v3 traps
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press
[Q]
.
Click
[<OK>]
to apply the entry.
Click
[<Abort>]
to discard the entry.
