WAGO 750-8202/040-001 Manual Download Page 131

Page: 131 / 400

WAGO I/O SYSTEM 750 XTR

Commissioning 131

750-8202/040-001 PFC200 2ETH RS TELE XTR

Manual

Version 1.2.0, valid from FW Version 03.01.07(13)

7.8.1.8.2 “Interface Xn” Groups

One group (“Interface X1” / “Interface X2”) is displayed for each connection.

Table 61: WBM “Ethernet Configuration” Page – “Interface Xn” Groups

Parameter

Explanation

Enabled

You can enable or disable the interface.

Autonegotiation on

When Autonegotiation is enabled, the connection

modalities are negotiated automatically with the peer

devices.

Speed/Duplex

Select the transmission speed and the duplex

method:
10 Mbit half-duplex

Information can only be

sent or received.

100 Mbit half-duplex

10 Mbit full-duplex

Information can be sent

and received

simultaneously.

100 Mbit full-duplex

Click

[Submit]

to apply changes. The changes are effective immediately.

Summary of Contents for 750-8202/040-001

















































































































































































































































































































































































































Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands

WAGO 750-8202/040-001, Manual

Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands