116 Commissioning
WAGO I/O SYSTEM 750 XTR
750-8202/040-001 PFC200 2ETH RS TELE XTR
Manual
Version 1.2.0, valid from FW Version 03.01.07(13)
7.8
Configuration
The following methods are available for configuring the controller:
•
Access to the Web-based management system via the PC using a web
browser (section “Configuration Using Web-
Based Management [WBM]”)
•
Access to the “Console-Based Management” tool via the PC using a
terminal program (section “Configuration Using a Terminal Program
[CBM]”)
•
Access via the CODESYS PLC program using the CODESYS 2 library
WagoConfigToolLIB.lib (section “Appendix” > “WagoConfigToolLIB.lib”) or
the
e!
RUNTIME
library “WagoAppConfigTool.lib”
•
Access via the PC using “WAGO Ethernet Settings” (section “Configuration
Using ‘WAGO Ethernet Settings’”).
The CBM is basically for the initial configuration and startup of the controller.
Therefore, it only provides a subset of the WBM parameters. For example,
parameters that cannot be displayed in a terminal window in a reasonable way
and are not necessary for initial startup are not displayed. You can find the
explanations of the parameters starting with the section “‘Information’ Page.”
