246 Run-time System CODESYS 2.3
WAGO I/O SYSTEM 750 XTR
750-8202/040-001 PFC200 2ETH RS TELE XTR
Manual
Version 1.2.0, valid from FW Version 03.01.07(13)
12. Use
[Import configuration from file]
to add a configuration imported
previously using WAGO-I/O-
CHECK
.
13. To close the I/O Configurator, click
[OK]
.
14. The individual inputs and outputs of the selected I/O module are displayed
in the right half of the configuration window.
Here, you can declare a dedicated variable in the “Name” column for each
input and output, e.g., “Output_1”, “Output_2”, “Input_1”, “Input_2”.
Figure 64: Variable Declaration
15. The added I/O modules appear in the control configuration under
“K-
Bus[FIX]
” with their associated fixed addresses and, where applicable,
their previously set variable name.
Figure 65: Control Configuration: I/O Modules with Their Associated Addresses
