WAGO 750-8202/040-001 Manual Download Page 155

Page: 155 / 400

WAGO I/O SYSTEM 750 XTR

Commissioning 155

750-8202/040-001 PFC200 2ETH RS TELE XTR

Manual

Version 1.2.0, valid from FW Version 03.01.07(13)

</dg_

7.8.1.21 “System Partition” Page

The settings for specifying the partition that the system will be started from are

shown on the “System Partition” page.

7.8.1.21.1 “Current Active Partition” Group

The partition currently in use is displayed here.

7.8.1.21.2 “Set Inactive Partition Active” Group

Click

[Activate Partition]

to start the system from a different partition at the next

controller reboot.

Ensure bootable partition!

A functional firmware backup must be present in the boot partition!

Summary of Contents for 750-8202/040-001

















































































































































































































































































































































































































Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands

WAGO 750-8202/040-001, Manual

Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands