384 Appendix
WAGO I/O SYSTEM 750 XTR
750-8202/040-001 PFC200 2ETH RS TELE XTR
Manual
Version 1.2.0, valid from FW Version 03.01.07(13)
Table 287: Description of Configuration Scripts for “SNMP”
Parameters Status Call-Up
Output/Input
Valid
Configuration of SNMP v3
Any number of SNMP v3 users can be created. A user that has been set up is always active; the
complete data set must be deleted to deactivate a user.
Authentication
Name
read
get_snmp_data
v3-auth-name
<Nummer>
Specifies the user name for the
v3 user.
The <number> parameter
enables consecutive reading of
the related data from the
individually configured trap
receiver for a short period of time
(without interim changing of the
data). This is a consecutive
number that is not connected to
the data. If the number is not
included, the data of the first user
are read.
Right
away
Authentication
encryption type read
get_snmp_data
v3-auth-type <Number>
Specifies the type of encryption
that the v3 user uses (none,
MD5, or SHA).
Parameter <number> see
“Authentication Name”.
Right
away
Authentication
key
read
get_snmp_data
v3-auth-key <Nummer>
Specifies the key string for
authentication.
Parameter <number> see
“Authentication Name”.
Right
away
Privacy
encryption type read
get_snmp_data
v3-privacy <number>
Specifies the type of privacy
encryption for the v3 user (none,
DES, or AES).
Parameter <number> see
“Authentication Name”.
Right
away
Privacy key
read
get_snmp_data
v3-privacy-key
<number>
Specifies the key string for
privacy. If nothing is entered, the
SNMP agent uses the
“Authentication Key”.
Parameter <number> see
“Authentication Name”.
Right
away
Trap receiver
address
read
get_snmp_data
v3-notification-receiver
<number>
IP address of an SNMP manager
that the agent traps for this v3
user are sent to. If nothing is
entered here, no traps are sent
for this user.
Parameter <number> see
“Authentication Name”.
Right
away
