WAGO 750-8202/040-001 Manual Download Page 103

Page: 103 / 400

WAGO I/O SYSTEM 750 XTR

Commissioning 103

750-8202/040-001 PFC200 2ETH RS TELE XTR

Manual

Version 1.2.0, valid from FW Version 03.01.07(13)

7.2

Determining the IP Address of the Host PC

To ensure that the host PC can communicate with the controller via ETHERNET,

both devices must be located in the same subnet.

To determine the IP address of the host PC (with the Microsoft Windows

operating system) using the MS DOS prompt, proceed as follows:

Open the MS DOS prompt window.

To do this, enter the command “cmd” in the input field under

Start

Execute…

Open:

(Windows

XP) or

Start

Search programs/files

(Windows

7) and then click

[OK]

or press

[Enter]

In the MS DOS prompt enter the command “ipconfig” and then press

[Enter]

The IP address, subnet mask and standard gateway, including the

appropriate parameters, are displayed.

Summary of Contents for 750-8202/040-001

















































































































































































































































































































































































































Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands

WAGO 750-8202/040-001, Manual

Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands