WAGO 750-8202/040-001 Manual Download Page 129

Page: 129 / 400

WAGO I/O SYSTEM 750 XTR

Commissioning 129

750-8202/040-001 PFC200 2ETH RS TELE XTR

Manual

Version 1.2.0, valid from FW Version 03.01.07(13)

7.8.1.7.3 “DNS Server” Group

Table 59: WBM “TCP/IP Configuration” Page – “DNS Server” Group

Parameters

Explanation

Configured: None/

DNS Server n

The addresses of the defined DNS servers are

displayed. If no server has been defined,

“Configured: None” is displayed.

New Server IP

Add additional DNS addresses.

You can enter 10 addresses.

Additionally used

(assigned by DHCP)

The DNS servers assigned if necessary by DHCP

(or BootP) are displayed. If no DNS server has been

assigned by DHCP (or BootP), “none” is displayed.

Click

[Delete]

to remove the selected DNS server. The change is effective

immediately.

Click

[Add]

to add the entered DNS server. The change is effective immediately.

Summary of Contents for 750-8202/040-001

















































































































































































































































































































































































































Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands

WAGO 750-8202/040-001, Manual

Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands