WAGO I/O SYSTEM 750 XTR
Appendix 385
750-8202/040-001 PFC200 2ETH RS TELE XTR
Manual
Version 1.2.0, valid from FW Version 03.01.07(13)
Table 287: Description of Configuration Scripts for “SNMP”
Parameters Status Call-Up
Output/Input
Valid
Add new v3-
User
write
config_snmp
v3-edit=add
v3-auth-name=<Value1>
v3-auth-type=<Value2>
v3-auth-key=<Value3>
v3-privacy=<Value4>
v3-privacy-
key=<Value5>
v3-notification-
receiver=<Value6>
Creating a new v3 user.
This must be a new, unique user
name.
Parameters:
User name (<Value1> = string,
min. 8 and max. 32 characters,
lower case letters (a … z), upper
case letters (A … Z), numbers
(0 … 9), special characters !()*~'.-
_ but no spaces)
Encryption method. (<Value2> =
none, MD5 or SHA).
Key string for authentication,
(<Value3> = String, min. 8 and
max. 32 characters, lower case
letters (a … z), upper case letters
(A … Z), numbers (0 … 9),
special characters !()*~'.-_ but no
spaces)
Privacy encryption method
(<Value4> = none, DES or AES).
Privacy key string (<Value5> =
String, min. 8 and max. 32
characters, lower case letters
(a … z), upper case letters
(A … Z), numbers (0 … 9),
special characters !()*~'.-_ but no
spaces), can also be blank; in
this case the authentication key
will be used. The IP address of a
trap receiver is transmitted as the
notification receiver (<Value6> =
number.number.number.number)
This parameter is not required if
no v3 traps are to be sent.
After
restart
Delete v3 user write
config_snmp
v3-edit=delete
v3-auth-name=<Value>
Deleting a v3 user that has been
set up.
Because the doubled allocation
of the same user name is
prevented when creating a user,
the name is sufficient to uniquely
identify a data set (<Value> =
string).
After
restart
14.2.1.10 WagoLibCpuUsage.lib
The controller 750-8202/040-001supports the following function blocks of the
“WagoLibCpuUsage.lib” library:
-
CPU_Usage
The document containing the description of the library and the function block it
includes is available for download on the Internet at
