250 Run-time System CODESYS 2.3
WAGO I/O SYSTEM 750 XTR
750-8202/040-001 PFC200 2ETH RS TELE XTR
Manual
Version 1.2.0, valid from FW Version 03.01.07(13)
3.
In the “Name” field enter a designation for your fieldbus controller and then
click on “Tcp/Ip (Level 2 Route)”. Then click
[OK]
.
Figure 70: Creating a Communication Link – Step 2
4.
In the “Communication Parameters” window enter the
IP address of your
fieldbus controller
in the “Address” field and then press Enter. To close
the window click on
[OK]
.
To select an already created controller, select it in the left window and then
click on
[OK].
Figure 71: Creating a Communication Link – Step 3
5.
Transfer the PLC program by clicking on
Online
in the menu bar and select
Login
.
6.
Ensure that the Run/Stop switch for the fieldbus controller is set to “Run”.
7.
Start the PLC program by clicking on
Online
>
Start
in the menu bar.
