WAGO 750-8202/040-001 Manual Download Page 64

Page: 64 / 400

64 Function Description

WAGO I/O SYSTEM 750 XTR

750-8202/040-001 PFC200 2ETH RS TELE XTR

Manual

Version 1.2.0, valid from FW Version 03.01.07(13)

4.1.2.3 Root Certificates

For communication encrypted with TLS, root certificates are used to verify the

authenticity of the communication partner.

A root certificate, which is signed by a certificate authority, serves to verify the

validity of all certificates issued by this certificate authority.

The root certificates stored on the controller (root CA bundle) form the basis for

authentication of services hosted on the Internet (e.g., email providers and cloud

services).

The standard storage location for the root certificates is /etc/ssl/certs/ca-

certificates.crt.

This file contains the certificates provided by Mozilla. A list of the included root

certificates and their respective validity periods can be requested from the

following address:

https://hg.mozilla.org/releases/mozilla-release/raw-

file/79f079284141/security/nss/lib/ckfw/builtins/certdata.txt

The root certificates can be updated on the controller by updating the file

/etc/ssl/certs/ca-certificates.crt (see section “Service” > “Updating Root

Certificates”).

Summary of Contents for 750-8202/040-001

















































































































































































































































































































































































































Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands

WAGO 750-8202/040-001, Manual

Search results

Summary of Contents for 750-8202/040-001

Reviews:

Related manuals for 750-8202/040-001

Brands by name

Popular brands