WAGO I/O SYSTEM 750 XTR
Appendix 375
750-8202/040-001 PFC200 2ETH RS TELE XTR
Manual
Version 1.2.0, valid from FW Version 03.01.07(13)
Table 281: Description of the Configuration Scripts for “Clock”
Parameters Status Call-Up
Output/Input
Effective
Clock
Time and Date
Date on device,
local
read
get_clock_data
date-local
Local time and date
Immediately
write
config_clock
type=local
date=<Datum>
Change date. The format for
<date> is: DD.MM.YYYY
Time on device,
UTC
read
get_clock_data
time-utc
Time/UTC
Immediately
write
config_clock
type=utc time=<Time>
Change time, based on UTC
time. The format for <time> is:
hh:mm:ss xx
Time on device,
local
read
get_clock_data
time-local
Time/local time
Immediately
write
config_clock
type=local time=<Time>
Change time, based on local
time. The format for <time> is:
hh:mm:ss xx
12-Hour-
Format
read
get_clock_data
display-mode
Presentation format either as
12 or 24-hour format:
Possible return values:
- 12-hour-format
- 24-hour-format
Immediately
write
config_clock _
display_mode
display-mode=<value>
Set the presentation format
for the time.
Possible entries for <Value>:
- 12-hour-format
- 24-hour-format
Time Zone
TZ-String
read
get_clock_data
tz-string
Currently set time zone –
original TZ string as stored in
the operating system.
Immediately
write
config_timezone
tz-string=<String>
Change TZ string directly.
Example of <String>:
CET-1CEST,
M3.5.0/2,M10.5.0/3
Table 282: Description of the Configuration Scripts for "Administration"
Parameters Status Call
Output/Input
Effecti
ve
Administration
Configuration of Serial Interface
Configuration of
serial interface
read
get_coupler_details
RS232-owner
User of the serial interface
Possible return values are:
- Linux
- None
immedia
tely
write
config_RS232
owner=<value>
User of the serial interface
Possible entries for <value> are:
- Linux
- None
